Lega DAISY Guide D'instructions page 17

3.2 ROTARY BLADES (fig. 3 page 17)
To adjust position of the rotary
blades, act on knob (E) at frame
Fig. 3
outlet position (see fig. 3).
By fully tightening the knob, it is also
possible to totally disable the rotary
blade device.
Lever (F) allows to quickly separate
the blades to facilitate the extraction
of a frame or in the case of reversal
of chain motion direction.
The action of the rotary blades can
also be excluded in a practical and
fast way, using the lever stop placed
next to it.
E F
3.3 CLUTCH (fig. 4-5 page 17)
Fig. 4
The chain drive pinion (35) is idle-
mounted on the shaft (36) of the
gearmotor (38). Motion is transmitted
by two elastic joints that are pressed
laterally. Pressure is given by nut
(DA) and locknut (CD) screwed into
the shaft head.
     
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
17 / 53