Klauke EK 120U plus Manuel D'utilisation page 6

Bedienungsanleitung EK 120U plus
__________________________________________________________________________________________________________________
8. Technische Daten
Gewicht des kompl. Gerätes: ca. 6 kg (inklusive Akku)
Preßkraft:
Hub:
Antriebsmotor:
Akkuspannung:
Akkukapazität:
Akku-Ladezeit:
Preßzeit:
Pressungen pro Akku:
Hydrauliköl:
Umgebungstemperatur:
Schalldruckpegel:
Vibrationen:
Anmerkung
Diese Bedienungsanleitung kann jederzeit kostenlos unter der
Bestell-Nr. HE.7844_F nachbestellt werden.
ca. 120 kN
20 mm
Gleichstrom-Permanentfeldmotor
12 V
2,6 Ah (RA4)
ca. 1 h [LG 4], bzw. ¼ h [LG5]
6 s bis 13 s (abhängig vom
Verbinderquerschnitt)
ca. 65 Pressungen (RA4)
(Cu 150 mm² DIN 46235)
ca. 190 ml "Shell Tellus T 15"
-20°C bis +40°C
70 dB (A) in 1m Abstand
< 2,5 m/s (gewichteter
Effektivwert der Beschleunigung)
Instruction Manual
for the electric-hydraulic crimping unit Type EK 120U plus,
Serial-No. ........................
Index
1 Introduction
2 Labels
3 Warranty
4 Description of the electric-hydraulic crimping unit
4.1 Description of the components
4.2 Brief description of the important features of the unit
4.3 Description of the light diode display
5 Remarks in respect of the determined use
5.1 Operation of the units
5.2 Explanation of the application range
5.3 Mounting instructions
5.4 Service and Maintenance instructions
5.5 Remarks on the use of the Battery Cartridge and Charger
5.6 Storage and transport of the crimping unit.
6 Troubleshooting
7 Putting out of operation/waste disposal
8 Technical data
Symbols
Safety warnings
Please do not disregard these instructions in order to
avoid human injuries and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump
unit.
1. Introduction
Before starting to use the tool please read the
instruction manual carefully.
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of this
tool must only be performed by specially trained personnel. The
minimum age is 16 years.
This instruction manual has to be carried along during the entire life
span of that tool.
The operator has
- to guaranty the availability of the instruction manual for the user
and
- to make sure, that the user has read and understood the instruction
manual.
2. Labels
On the labels fixed on the housing of the tool you'll find the type
specification name of the manufacturer and the company logo. On
the opposite side of the housing you'll find a label with a brief
presentation of the scope of manageable cross-sections for copper
and aluminium and the pressing force. The serial number is on the
hydraulic cylinder between the housing and the crimping head.
On the crimping head you'll find a warning against possible injuries
during the crimp process.
3. Warranty
If correct operation is guaranteed our warranty is 12 months from
the time of delivery.
4. Description of the electric-hydraulic crimping unit
4.1. Description of the components
The electric-hydraulic crimping unit type EK 120U plus is a hand
held tool and consists of the following components:
Seite 6