Fault Causes; Standstill And Disposal - Helios MiniVent M1/100 F Notice De Montage Et D'utilisation

Installation and Operating Instructions
m
WARNING
m
WARNING
MiniVent M1/100/120 F
8 .1

Fault causes

m The safety instructions in section 1 .2 must be observed!
8 .2

Standstill and disposal

m The safety instructions in section 1 .2 must be observed!
Parts and components of the fan, whose service life has expired, e.g. due to wear and tear, corrosion, mechanical
load, fatigue and/or other effects that cannot be directly discerned, must be disposed of expertly and properly after
disassembly in accordance with the national and international laws and regulations. The same also applies to auxiliary
materials in use. Such as oils and greases or other substances. The intended and unintended further use of worn
parts, e.g. impellers, rolling bearings, filters, etc. can result in danger to persons, the environment as well as machines
and systems. The corresponding operator guidelines applicable on-site must be observed and used.
17
EN