Using The Foot Pedal - Singer Steam ironer 580 Manuel D'instruction

Rouleau de repassage à la vapeur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE FOOT PEDAL

The Foot Pedal is used to control the raising and lowering of
the ironing roller, as well as its speed. There are 3 positions:
A, B and C.
Position A is the Starting Position. The roller remains in the
raised position. The Foot Pedal is not in use.
Position B is the Press Position. The roller is lowered and
ready for pressing when you apply light pressure to the Foot
Pedal.
Positions C is the Working Position. The roller is lowered
and rotating. In Position C, the Rotary Steam Iron has an
electronic speed control. The more you step on the foot pedal,
the faster the roller will rotate.
A
B
Note: The SINGER® Rotary Steam Iron is fi tted with an
energy-saving circuit. If the foot pedal is not operated for up
to 8 minutes, the heater and steam generator are automati-
cally switched off . When the foot pedal is pressed again, the
heating shoe, and if appropriate, the steam generator, are
switched on again. The most recently set ironing setting has
been reached only when no LEDs are fl ashing. Ironing can
then be continued.
Functions
C
7

Publicité

Table des Matières
loading

Table des Matières