Singer Steam ironer 580 Manuel D'instruction page 20

How to use
IRONING SHIRTS OR BLOUSES
5. Pull the shirt outwards and iron over the side seam to
approximately 6 inches (15cm) into the back. Repeat the
process for the other front.
6. Place the hem of the back on the heating shoe and iron
the back up to the start of the sleeve.
7. Now pull both sleeves over the free ends of the heating
shoe. Iron the shirt up to the collar. If there are back
pleats, draw them together so that the pleats lie proper-
ly. If the shirt cannot be pulled over the free end of the
heating shoe, insert the back as done for the front and
iron from sleeve seam to sleeve seam.
8. Press the collar from the free end to the collar stand
(Illustration 8).
18
5
6
7
8