Lenze 9400 E94ASHE Série Instructions De Montage page 80

8 Wiring the device modules
Safety modules
X82.3
X82.4
Cable cross-sections and tightening torques
Type
Wire end ferrule,
insulated
Rigid
80
Labelling Description
GCL GND clock output
GI2 GND IN I2A/I2B
I2B Sensor input 2, channel B (only for passive sensors)
I2A Sensor input 2, channel A (only for passive sensors)
GCL GND clock output
GI1 GND I1A/I1B
I1B Sensor input 1, channel B (only for passive sensors)
I1A Sensor input 1, channel A (only for passive sensors)
n. c. This terminal is not assigned.
Labelling Description
GCL GND clock output
GI4 GND I4A/I4B
I4B Sensor input 4, channel B (only for active sensors)
I4A Sensor input 4, channel A (only for active sensors)
n. c.
n. c.
This part of the terminal strip is not assigned.
n. c.
Sensor input 3 is not available.
n. c.
n. c.
2
[mm ]
0.25 ... 0.5
0.14 ... 1.5

[Nm] AWG
24 ... 20
Spring terminal
26 ... 16
[lb-in]
Spring terminal
EDK94ASH24 DE/EN/FR/ES/IT 3.1