Function Modules - Lenze 9400 E94ASHE Série Instructions De Montage

8.2

Function modules

Use these modules in slot
Digital frequency
Connections
Pos. Description
X9 Input for digital frequency, 9-pole Sub-D plug
X10 Output for digital frequency, 9-pole Sub-D socket
X9
5
9
1 6
SUBD09010
EDK94ASH24 DE/EN/FR/ES/IT 3.1
MXI1 or MXI2
Pin Designation Explanation
1 B
2 A TTL input signal from encoder or encoder simulation
3 A
4 +5 V Regulated voltage supply for encoder
(pin 8 = sense has to be used)
5 GND -
6 Z
TTL input signal from encoder or encoder simulation
7 Z
8 The function of this lead has to be set in the standard device:
S Sense (sensor lead for voltage regulation, Lenze setting)
Lc Lamp control
E Enable
9 B TTL input signal from encoder or encoder simulation

Wiring the device modules
Function modules
MMI MSI.
8
E94AYFLF004
71