Feeding Schedule Setup; Immediate Feed Mode - Num'axes TINY PET FEEDER Guide D'utilisation

Feeding schedule setup:

•
Press the "MODE" button to switch to meal programming mode, then press the "SET" button for 2 seconds.
•
The number "1" for meal no.1 flashes, press "SET" to confirm.
•
The number of portions flashes: adjust the number of portions using the "+" and "-" buttons and press
"SET" to validate (1 portion = approx. 10 g of dry food).
•
The meal hour field flashes: set the time at which you want to dispense the 1
buttons and press "SET" to confirm.
•
The meal minute field flashes: adjust the minutes using the "+" and "-" buttons and press "SET" to confirm.
•
Press "+" to program the next meal. Repeat above steps for as many meals (up to 12) as you want to
schedule.
NOTE: If you don't press any buttons in a 5-second interval, the LCD screen will automatically return to normal
mode.
Add a meal
CAUTION: you do not have to reprogram the complete feeding schedule; the new scheduled meal will be inserted
automatically.
Example :
Delete a meal
To delete a meal, simply reduce the number of portions for the meal to zero. The "dEL" message will flash for 2
seconds to confirm that the meal is deleted.

Immediate Feed mode

If you wish to feed your pet before the next scheduled meal, you can use the Immediate Feed feature. Press the
"FEED" button for 2 seconds to trigger manual dispensing and keep the button pressed until the wanted amount of
food is served.
th
Add a 6 meal
06-15:30
10
st
meal using the "+" and "-"