Top Panel - Denon DJ SC6000 PRIME Guide D'utilisation

Features

Top Panel

Media Selection & Browsing
1. Touchscreen: This full-color, multi-touch display
shows information relevant to SC6000 PRIME's current
operation. Touch the display (and use the hardware
controls) to control the interface. See
Touchscreen Overview
2. Media Selection: These lights will illuminate to indicate
if the corresponding type of media is connected: USB,
SD, or Link.
3. Source: Press this button to show a list of devices
connected to SC6000 PRIME in the touchscreen (other
networked SC6000 PRIME units, USB drives, SD card,
Wi-Fi, etc.). Tap a device in the list to select it.
4. Media Eject: Press this button to show a list of devices
connected to that SC6000 PRIME unit in the touchscreen
(i.e., USB drives connected to its USB ports or an SD
card inserted into its SD card slot).
To eject a device, make sure none of its tracks are
being played, and then tap the Eject icon on the
touchscreen and follow the prompts.
5. Back: While in Library View, press this button to move
to the previous window. While in Performance View,
press this button to enter Library View.
6. Forward: While in Library View, press this button to
move to the next window. While in Performance View,
press this button to enter Library View.
7. Select/Zoom: While in Library View, turn this knob to
scroll through a list, and press the knob to select an
item or load a track to the layer in focus. Double-press
the knob to load a track to both layers ("instant doubles").
While in Performance View, turn this knob to zoom in and out of a track's waveform. Press and hold the knob to
adjust the beat grid (see
8. View / Preferences/Utility: Press this button to switch between Library View and Performance View. Double-press
this button to enter the Engine Lighting view. Press and hold this button to enter the User Profile menu.
Press and hold Shift and press this button to toggle between viewing single layer or dual layer waveforms on the
touchscreen. You can also press and hold Shift and then press and hold this button to swap deck positions.
9. Shortcuts: Press this button to open the
Source, User Profile and Settings.
Playback & Transport Controls
10. Layer: Press this button to switch the layer focus of the SC6000 PRIME.
11. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the wheel is touched and moved.
When the Vinyl button is on, move the platter to "scratch" the track as you would with a vinyl record. When the
Vinyl button is off (or if you are touching only the side of the platter), move the platter to temporarily adjust the
track's speed.
12. Platter Display: This display shows information relevant to the performance, including the current playhead position
and auto loop size, as well as album artwork. See
13. Wheel Adjust: Turn this knob to set how resistant the platter is to adjustments. This knob applies a brake to the
platter to prevent unintentional drifting due to environmental vibrations from bass frequencies, surface instability, etc.
14. Stop Time: Controls the rate at which the track slows to a complete stop ("brake time") when you pause it by
pressing Play/Pause (/).
15. Vinyl: Press this button to activate/deactivate a "vinyl mode" for the platter. When activated, you can use the platter
to "scratch" the track as you would with a vinyl record.
Operation >
for more information.
Operation > Performance View
Control
2
4
8
3
9
10
34
33
26
18
35
17
24
16
for more details on adjusting the beat grid).
Center, which includes quick links to other menus such as
Operation > Platter Display Overview
1
13
11
12
25
28 29 30 31 32
27
for more information.
5 6
7
14
15
23
22
21
19
20
7