Control Center; User Profile - Denon DJ SC6000 PRIME Guide D'utilisation

Control Center

Press the Shortcuts button or swipe down from the toolbar to open the Control Center. Here, you can quickly adjust
the Quantize and Continue settings by tapping the icons in the center of the screen. You can also access the following
pages. Click the links below to jump to that part of the guide:
•

User Profile

– This menu is used to edit your performance preferences.
•
Settings – This menu is used to edit the settings of the PRIME hardware.
•
Source – This menu is used for selecting your source media device.
•
Wi-Fi – This menu is used for connecting to and configuring your Wi-Fi network.
•
Engine Lighting
User Profile
To open the User Profile menu, press and hold View.
To close the User Profile menu, press View again.
In the User Profile menu, swipe up or down to scroll through the options, and tap an option to select it:
Playback
• Track Start Position: This setting determines where the beginning of a track is after it loads. Select the actual start
of the file (Track Start) or the automatically detected beginning of an audio signal (Cue Position).
• Default Speed Range: This setting determines the range of the pitch fader. Select +4%, 8%, 10%, 20%, or 50%.
• Sync Mode: This setting determines the degree of synchronization applied when you press the Sync button on
SC6000 PRIME:
o Bar: The tempo will be synced, and the track will be automatically bar-matched with the track on the lead unit
(the downbeats of each bar will be aligned).
o Beat: The tempo will be synced, and the track will be automatically beat-matched with the track on the lead unit.
o Tempo: Only the tempo will be synced (the BPM will match that of the lead deck).
• Sync Button Action: This setting determines how the Sync button will act when pressed.
o Toggle: This mode allows you to toggle sync on and off without having to hold Shift.
o Shift Disable: This mode requires Shift to be held in order to turn off sync.
• Pitch Control Type: This setting determines the primary function of the Pitch Bend buttons. Select Pitch Bend to
keep the primary function as momentarily reducing or increasing the pitch, or select Range to set the primary
function to adjusting the range of the pitch fader. The function not used as the primary will still be available by
holding Shift and using the Pitch Bend buttons.
Cues/Loops
• Cue/Loop Quantization: This setting determines the degree of quantization for time-based features: hot cue points,
loops, and loop rolls. Select 1/8 beat, 1/4 beat, 1/2 beat, 1 beat, or 4 beats.
• Paused Hot Cue Behavior: This setting determines how pads will play their hot cue points. When set to
Momentary, playback will start from a hot cue point when you press and hold its pad—release the pad to return to
the hot cue point. When set to Trigger, playback will start from a hot cue point (and continue) when you press and
release its pad.
• Default Loop Size: This setting determines the default size of an auto loop when you load a new track to the deck:
1, 2, 4, 8, or 16 beats.
• Smart Loops: This setting determines whether or not a manual loop will be automatically expanded or reduced to a
conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off. This setting works
independently of the quantization setting.
• Move Cue To Loop In: This setting determines whether the song's initial Cue Point will automatically be moved to
the start of a loop (On), or remain at its current point (Off).
• Saved Loop Behavior: This setting determines the action of loops after they have been saved. When set to Reloop,
pressing a pad with a saved loop will start playing the loop again. When set to Disable, pressing a pad with a saved
loop will turn off the loop.
Display
• Track Title: This setting determines whether tracks titles are shown as the track's Filename or its embedded
Metadata (tags).
16
– This menu is used for working with the SoundSwitch Engine Lighting integration.