Denon DJ SC6000 PRIME Guide D'utilisation page 17

• Time Format: This setting determines whether or not pitch adjustment affects how the track time is displayed. When
set to Static, the track's time corresponds to locations in the track as usual; adjusting the pitch does not affect it.
When set to Dynamic, the track's time will automatically adjust to account for changes in pitch. For instance, if you
set the pitch fader to -8%, the track time will increase so it is 8% longer.
• Track End Warning: This setting determines how long before the end of a track SC6000 PRIME will warn you that it
is nearing the end. If the track is on the currently selected layer, the platter ring and track overview will flash. If the
track is on the opposite layer, the Layer button will flash.
• On Air Mode: This setting changes the platter ring illumination when the channel fader on the Denon DJ mixer is up
or down, indicating an active or "on air" deck. When this setting is On, raising the channel fader will change the
platter color from white to the selected color. When this setting is Off, the user-selected color will always be shown
regardless of the channel fader position.
Note: This requires a connection to a compatible Denon DJ mixer via Ethernet.
Safety
• Lock Playing Deck: This setting determines whether or not you will be able to load a track to the deck as it is
playing. Select On or Off. When this setting is on, the deck must be paused in order to load a track to it.
• Needle Lock: This setting determines whether or not you can tap the track overview in the display to jump to that
location in the track during playback. Select On or Off. You can use the track overview while playback is stopped
regardless of this setting. Alternatively, make sure the platter is in Vinyl Mode (press Vinyl so it is lit), touch the top of the
platter, and tap the desired location in the track overview.
• Pad Lock: This setting determines whether the pads and pad mode buttons (Hot Cue, Loop, Roll, Slicer) are
enabled or disabled. Select On or Off.
Library
• Key Notation: This setting determines how the track key is notated in the display. You can view the key as all Sharps,
all Flats, Open Key, or Camelot.
• Key Filter: This setting determines whether the Key filter shows tracks with the same key only (Match) or tracks with
compatible keys (Compatible).
• BPM Range: This setting determines the lowest- and highest-possible BPM values that will be used when tracks are
analyzed: 58–115, 68–135, 78–155, 88–175 or 98–195 BPM.
• BPM Filter Tolerance: This setting determines the "tolerance" of the BPM filter so you can include tracks with
tempos that are within a small range of the selected tempo. Select +0, 1, 2, 3, 5, 10, or 15.
• Collection Browse Behavior: This setting determines browsing behavior when using the Library. When set to Select,
tapping a playlist or folder will select it, and a double-tap is required to open it. When set to Open, tapping a playlist
or folder will open it.
• Demo Content: Use this option to enable or disable the pre-installed demo content.
Deck Colors
• Deck Colors: These settings determine the colors of the light ring around the platter for each layer on each player.
Tap the arrow next to A or B to select the layer, and then tap a color to select it. The light ring will change color
immediately.
Settings
To open the Settings (formerly Utility) menu, press and hold View, or swipe down from the toolbar, and then tap the
Settings tab.
To close the Settings menu, press View again.
In the Settings menu, swipe up or down to scroll through the options, and tap an option to select it:
Device
• Player #: This setting determines the number of this player. When selecting a source device to browse, this number
is shown next to the device name in the display.
• Layer B: This determines whether this SC6000 PRIME will use both deck layers (On) or just one (Off).
• Wi-Fi: This determines whether Wi-Fi connectivity is enabled (On) or disabled (Off). Tap the gear icon to open the
Wi-Fi settings. See Control Center > Wi-Fi
• Time/Date: This displays the current local time and date. Tap Sync Time when connected to the internet to
automatically sync the time.
for more information about the Wi-Fi menu.
17