Blade Replacement - Cembre B-TC0405 Notice D'utilisation

TABLE 3 - TABLEAU 3 - TABELLE 3 - TABLA 3 - TAVOLA 3
4.2) Storage (Ref. to Fig. 3 page 35)
When not in use, the tool should be stored and transported in the metal case, to prevent
damage. Metal case: VAL B-TC095, size 565x410x132 mm (22.2x16.1x5.2 in.), weight
6,7 kg (14.7 lbs).
4.3) Head rotation
For ease of operation, the tool head can rotate through 180°, allowing the operator to work
in the most comfortable position.
Warning: Do not attempt to turn the head if the hydraulic circuit is pressurised.

5. BLADE REPLACEMENT

After extended use, the blades may loose their cutting edge.
Replace the blades as follows:
5.1) Lower blade
– Remove locking pin (39) and open tool head.
– Operate tool to make the lower blade (36) advance until split pins (42) are visible on
ram (88).
– Remove split pins (42 and 35) using a drift and remove the lower blade.
– Insert the new blade and secure with spring pins.
Warning: before closing the tool head release the oil pressure and retract the lower
blade, otherwise the blade may hit the lower blade edge and damage it.
5.2) Upper blade
– With the lower blade fully retracted, the tool head closed and the locking pin (39) fully
secured, hold the tool on the blade spacer (85) or (94) in a bench vice (fi g. 3).
– With an 6 mm wrench, unscrew 4 set-pins (97),remove the two holding plates (86) and
the upper blade (48) noting the position of the cutting edge bevel.
– Insert the new blade, noting the position of the cutting edge bevel.
– Fit the 2 holding plates (86) and secure with 4 screws (97).
6. RETURN TO
In the case of a breakdown contact our Area Agent who will advise you on the problem
and give you the necessary instructions on how to dispatch the tool to our nearest service
Centre; if possible, attach a copy of the Test Certifi cate supplied by Cembre together
with the tool or, if no other references are available, indicate the approximate purchase
date and the tool serial number.
33 6
(Ref. to Fig. 2 page 23)
FOR OVERHAUL
Cembre
ENGLISH