Operation Of Unit - elero Picolo XL Instructions De Montage

Installation
Adjustment of limit switch "ejected" (setting screw max)
Stroke reduction:
Stroke reduction:
Tab. 4 Adjust setting screw max
Adjustment of limit switch "retracted" (setting screw min)
Stroke reduction:
Stroke reduction:
Tab. 5 Adjust setting screw min
4.4.3

Operation of unit

CAUTION
Damage to the device due to wrong operation.
• The thermal protection switch must not be used as a regular overload swit-
ching device.
• Fast polarity reversal of the traversing direction of the device is not permissi-
ble.
• The device must come to a complete standstill before switching the traver-
sing direction.
Turn in direction of "–"
MINUS
Turn in direction of "+"
PLUS
Turn in direction of "–"
MINUS
Turn in direction of "+"
PLUS
Limit switch position is moved
in direction of "retracted".
(Piston rod ejects less no-
tably)
Limit switch position is moved
in direction of "ejected".
(Piston rod ejects further)
Limit switch position is moved
in direction of "ejected".
(Piston rod retracts
less notably)
Limit switch position is moved
in direction of "retracted".
(Piston rod retracts
further)
23