Connections - Denon DCM-380 Mode D'emploi

7

CONNECTIONS

(1) Connecting the Output Terminal
• Connect one end of the connection cord supplied with the CD
Player to the output terminals, left (L) and right (R) of the CD
Player, and the other end to the CD, AUX or TAPE PLAY input
terminals, left (L) and right (R), of the amplifier.
DCM-380/280
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
(Amplifier)
SIGNAL
GND
SPEAKER SYSTEMS
R
INPUTS PB REC
PHONO CD TUNER AUX TAPE-1 TAPE-2 TAPE-1 TAPE-2
/DAT /MD /DAT /MD
L L
R R
(2) Connecting the Digital Output Jack (COAXIAL)
• Use a 75 Ω/ohm pin cord to connect the digital output jack
(COAXIAL) of the CD Player to the digital input jack (COAXIAL) on
a digital processor or MD recorder, available in stores.
DCM-380/280
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
(Digital processor or MD recorder)
DIGITAL INPUT
COAXIAL
OPTICAL
Power supply outlet
L
A
B
AC OUTLET
Power supply outlet
(3) SYNCHRO Jack Connections
• Connect the SYNCHRO jack with a DENON cassette deck which
is equipped with a SYNCHRO jack, then make a synchronized
recording. Use the connection cord supplied with the cassette
deck.
• To make use of this function, also connect the output jacks and
make the settings so that a recording can be made from the CD
player to the cassette deck.
DCM-380/280
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
(Cassette Deck)
ENGLISH
Power supply outlet
11