Cleaning And Maintenance; Technical Specifications - HQ Power VDPLOP1209RGB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Channel
From
0
6
10
0
52
102
7
153
204
255
8
0
0
52
9
102
153
204
8.

Cleaning and Maintenance

All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol. Apply the solution directly to a soft, lint-free cloth or a lens cleaning tissue.
Softly drag any dirt or grime to the outside of the external optics or glass/transparent surface. Gently polish
until free of haze and lint. Dry carefully after cleaning.
Do not immerse the device in any liquid.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
9.

Technical Specifications

power supply
power consumption
LEDs
beam angle
IP rating
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 04 – 08/01/2013
VDPLOP1209RGB
To
Description
9
No function
255
Strobe slow to fast
51
No function
101
Auto program 1
152
Auto program 2
203
Auto program 3
254
Auto program 4
255
Auto program 5
255
Auto program speed slow to fast (channel 7 between 52 and 255)
51
Dimmer curve default speed
101
Linear dimmer
152
Non-linear dimmer 1
203
Non-linear dimmer 2
255
Non-linear dimmer 3
100 ~ 230 VAC - 50/60 Hz
46 W
12 x 3 W tricolour
22°
IP65
125 x 215 x 360 mm
4.2 kg
8
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières