Important - Fracarro D-Matrix 4S EVO Instructions D'emploi

Select the language by clicking on the flags at the top right (available in English, Italian, French and German).
NOTE: the configuration must be made using just one browser window to avoid risk of making mistakes: therefore two or more configuration
cards cannot be opened on the same browser as the only one that would work would be the last that was opened.
IMPORTANT: to access programming by the web interface, the panel menu must not be used. The web interface could change according to the
software release installed in the product.
The homepage in figure 2 shows the general status of the D-MATRIX 4S EVO system.
The STATUS item can always give information about the installed software version of the product and its serial number.
The top section shows the INPUT status, displaying the main data about the level and reception quality parameters (CBER/MER) and the name
of the transponder received.
Each input also has a led showing the input status, with the following colours:
• GREEN if the input is enabled and the receiver is locked (for USB: function enabled and selected file read correctly).
• YELLOW if the input is enabled but the receiver is not locked (for USB: function enabled but file missing, not selected or incompatible)
• RED if the input is remote power feed overload
• GREY if the input is not enabled
The OUTPUT sections gives the status of the four output MUX and displays the channel and the output frequency, the RF level, the total used
bitrate by the entered program and the available bitrate of the MUX. This piece of information is provided in both numerical and graphic format
with a horizontal bar; the LIGHT BLUE bar shows the instantaneous used bitrate, the GREY part shows the maximum peak and the WHITE part
shows the bitrate which is still available.
If the "RESET PEAK" button is pressed, the peak and overflow details are reset.
Each output MUX shows a light to indicate the status with the following colours:
• GREEN for normal functions
• DARK GREEN if the MUX is activated but overflow monitoring is disabled;
• GREY if the MUX is off;
• RED if there has been a bitrate overflow
FIG.2
34