Pbx / Supplementary Services; Dialling Pause - switel DC 56 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PBX / Supplementary Services

12 PBX / Supplementary Services
R function in private branch exchanges
If the telephone is connected to a private branch exchange, functions
such as transferring calls and automatic call back can be used via the
A button. Refer to the operating manual provided with your pri-
vate branch exchange as to which Flash time must be set in order to
use these functions. The sales outlet where you purchased the ex-
change can provide information as to whether the telephone will work
properly with the exchange. The Flash time is set using the menu. Re-
fer to Page 112 for the sequence of menu option selections.
R function (Flash) and supplementary services
Your telephone supports supplementary services provided by your te-
lephone network provider, such as brokering, call waiting and confe-
rence facilities. These supplementary services can be used by imple-
menting the A button. Please contact your telephone network
provider regarding which Flash time must be set to use the supple-
mentary services. Also contact your telephone network provider with
regard to enabling supplementary services. The Flash time is set
using the menu. Refer to Page 112 for the sequence of menu option
selections.
Caller number display (CLIP
The caller number display (CLIP) is a supplementary service
offered by your telephone network provider. Contact your
network provider for further information.
If this function is available with your telephone line, the number of the
caller appears in the display when the phone rings. If the caller has
suppressed transmission of his phone number, the corresponding
message appears in the display. The phone number is not displayed
and, as a result, is not stored in the call list.
1
CLIP: Calling Line Identification Presentation = Displays the
caller's phone number.
116
106
1
)
107

Dialling pause

When using private branch exchanges, it is necessary to dial an ac-
cess code to obtain the dialling tone for an outside line. When using
some older private branch exchanges, it takes a little time before the
dialling tone becomes audible. In the case of such private branch ex-
changes, a dialling pause can be inserted after the number for an out-
side line in order to continue dialling directly without having to wait for
the dialling tone.
2 sec. A
The actual phone number is dialled a certain time after the number for
an outside line.
The dialling pause can also be entered with the phone num-
bers in the phone book.
Insert a dialling pause

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dc561Dc562Dc563Dc564

Table des Matières