Viewing Audio Disc Information; Advanced Operations - Radio; Storing And Receiving Stations; Storing Automatically - Btm - Sony MEX-DV900 Mode D'emploi

2
Press M/m to select the file type to list
up, then press (ENTER).
To list up MP3 and WMA files, select "LIST
UP AUDIO FILES."
To list up DivX files, select "LIST UP
VIDEO FILES."
To list up JPEG files, select "LIST UP
IMAGE FILES."
3
Press M/m to select the desired file,
then press (ENTER).
Playback of the selected file starts.
With the main unit
Rotate the volume control dial instead of pressing M/
m.

Viewing audio disc information

During audio playback, you can check the disc
information on the monitor.
E.g., when playing an MP3
TRACK NAME
ALBUM NAME
ARTIST NAME
To list up, press
BROWSE
A Track number or track name
Disc name/Album name
Artist name
B Format
C Playback status (N, X, etc.)
D Current audio channel
When playing CD/MP3/WMA, the audio
channel can be changed. For details, see
"Changing the audio channel" on page 25.
E Track number/Total
F Elapsed playback time
G Current play mode
H Operation assist messages
Tip
You can select a track to play using Quick-BrowZer
(page 31).
32
A B C
MP3
0003/1000 ST
003:17 SHUF
E F G
.
H
Advanced Operations — Radio

Storing and receiving stations

SYSTEM
SETUP
M/m
Number
buttons
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
D Press (SRC) repeatedly until "TUNER"
appears on the main unit.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press (SYSTEM SETUP).
The system setup item appears.
3
Press M/m to select "BTM," then press
(ENTER).
The unit stores stations in order of frequency
on the number buttons ((1) to (6)).
A beep sounds when the setting is stored.
With the main unit
Press (SOURCE) instead of (SRC), press and hold
the volume control dial instead of pressing
(SYSTEM SETUP), rotate the volume control dial
instead of pressing M/m.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears on the main unit.
The number button indication appears on the
main unit.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When an RDS station is stored, the AF/TA setting is
also stored (page 33).
ENTER
SRC
MODE