Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support And Warranty - cecotec CONGA POPSTAR 2900 ERGOFLEX Manuel D'instructions

Suction power level is very
low
The operating time after
charging has decreased.

7. TECHNICAL SPECIFICATIONS

Product: Conga PopStar 2900 Ergoflex
Product reference: 05710
Battery voltage: 29,6 V
Voltage and frequency: 220-240 V ~, 50/60 Hz
Made in China | Designed in Spain

8. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

9. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The dust tank is full.
Filters are dirty or
blocked.
Air inlet of the vacuuming
tube or suction base are
blocked.
It has not been enough
charged.
Battery is damaged or
too old.
ENGLISH
Empty the dust tank.
Clean or replace the filter.
Clean the dirt attached to the
brush.
Charge the battery
completely.
Contact Cecotec's Technical
Support Service.
POPSTAR 2900 ERGOFLEX
31