Technical Specifications; Technical Support Service And Warranty - cecotec CONGA 1090 Serie Manuel D'instructions

ENGLISH
2 beeps
Red light
flashing
3 beeps
4 beeps

8. TECHNICAL SPECIFICATIONS

Model: Conga 1090/1091/1092 Excelsior
Product reference: 05110/05111/05112
100-240 V, 50/60 Hz
Battery: 14.4 V, 2600 mAh
Made in China | Designed in España
9. DISPOSAL OF OLD ELECTRICAL APPLICANES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electrical appliances must not be disposed
of with the normal unsorted municipal waste. Old appliances must be collected
separately, in order to optimize the recovery and recycling of the materials they
contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to
dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they
should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries

10. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
28
Bumper error
Free-fall sensor error
The robot cannot return to
its charging base or starting
position.
Check if the bumper is stuck and
press on both sides and center to
unblock it
Check if the robot is placed on an
uneven surface, if its wheels are off
the ground or if it is stuck in a dark
place and move it to a new location.
If not, clean the free-fall sensor.
Make sure there are no obstacles
in front of the charging base or
starting position. Clean the char-
ging terminals on both the charging
base and the robot with a clean,
dry cloth.