Water Dispenser (Models 380 And 440 - Optional); Can Rack (Models 380 And 440); Humidity Control - Whirlpool WBM35 Mode D'emploi

Lift the front part holding it with
the two hands, and pull it forward
carefully.
•
It is not advisable to remove the
front tilting lid from the extra-cold
compartment.
WATER DISPENSER
(Models 380 and 440 - Optional)
Your Refrigerator is provided with
an internal exclusive water
Dispenser that offers functionalism
to the consumption of chilled
water.
•
Place a glass
under the
Dispenser,
where the
water comes
out, and press the button until
you get the desired amount of
water in the glass.
•
To fill the
Dispenser up
with water, pull
it to the stop. Lift
the small cover
and fill up with
water. After filling up, close the
cover and push
the Dispenser
back to usage
position.
To avoid damage
when filling up,
avoid resting any
container on the
water Dispenser.
You can also fill
it up outsidethe
Refrigerator.
•
To keep adequate hygienics,
periodically clean the Dispenser.
Pull it to the stop, lift the front
part and take it out of the
Refrigerator.
Remove the
bigger cover to
help cleaning
inside. After
cleaning, fill the
Dispenser up
with water and
return it to the
original place in
the Refrigerator.
CAN RACK
(Models 380 e 440)
To allow for more usage flexibility of
the door panel, your Refrigerator is
provided with a retractable can rack,
(total capacity: six 350 ml cans).

HUMIDITY CONTROL

Certain foods such as fruit and
vegetables dehydrate when directly
exposed to cold and dry
environments. The vegetable
drawer keeps temperature and
humidity adequate to store fruits
and vegetables, preserving their
natural characteristics. The adequate
use of the Control allows you to
adjust the passage of air inside the
drawer according to your needs.
•
We recommend to keep the
Control closed to preserve
vegetables like lettuce, and open
to preserve fruits.
7