Electronic Monitoring; (Models 380 And 440) - Whirlpool WBM35 Mode D'emploi

Models 380 and 440
Every time you touch it, it either selects the Freezer
freezing range or the Fast freezing feature.
Minimum Medium Maximum
Minimum Medium Maximum
Minimum Medium Maximum
Minimum Medium Maximum

ELECTRONIC MONITORING

This Refrigerator is provided with an
exclusive monitoring system.
For your tranquility, it permanently
monitors the operation of your
product.
•
In case of any malfunction, the
monitor will actuate the alarm and
the control panel LEDs will flash.
•
Check whether the doors are
properly closed. In case one of
them is open, close it and the
alarm may stop immediately.
•
This system also monitors the inside
temperature of the product. In case
the inside temperature increases,
the alarm will sound. Avoid placing
hot food inside the product.
•
To switch off the alarm, push the
"Alarm" key. The LEDs, however,
will flash until the inside
temperature is ideal.
Minimum freezing: To be used when there is not much
food in the Freezer, and the doors are not much opened
Medium freezing: To be used under normal usage
conditions
Maximum freezing: To be used when there is a lot of
food in the Freezer, and the doors are opened a lot.
Fast Freezing: When the 3 LEDs come on, the fast
Freezing feature indicated to speed up freezing will be
selected. It will automatically switch off after 18 hours.

(Models 380 and 440)

5
Freezer key
•
This exclusive system of your
Refrigerator performs a
preventive monitoring.
It actuates the alarm before the
performance of the product is
impaired. That will give you time
to call your assistance shop or
your dealer to solve the problem.
•
Do not allow the product to
operate for a long time with the
LEDs flashing. Get in touch with
your assistance shop or your
dealer as soon as possible.
•
Depending on the nature of the
problem detected by the
monitoring system, the alarm may
sound again after a given time
(approximately two hours).
To switch it off, push the "Alarm"
key again. In such cases, to avoid
nuisance, you may unplug the
product until your shop assistant
or your dealer arrives.