Invacare Aquatec Pure Bidet Manuel D'utilisation page 11

1. Detach the water supply hose A on the part of the shut off
valve B.
2. Mount the T-valve C between shut off valve and water supply
hose.
If part A is a rigid pipe, it must be replaced by a flexible hose.
A
1. Insert the supplied packing nuts A into the fixing holes on the
toilet bowl.
One pair of standard packing nuts with a diameter of 14 mm
are included in the package as an accessory part. If the fixing
hole diameter on the toilet bowl is less than 14 mm, you
need to use other suitable packing nuts and washers.
1557407-E
B
A
C
D
Put the washers D on both packing nuts.
1.
Set in place the brackets B on the catch plate C.
2.
3. Fasten the catch plate with the fixation bolts A through the
brackets in both packing nuts.
C
B A
Screw the PVC flexible hose A clockwise on the inlet adapter
1.
B of the shower toilet.
Slide the shower toilet to the catch plate C installed.
2.
Setup
11