Using The Shower Toilet - Invacare Aquatec Pure Bidet Manuel D'utilisation

Pos. LED Function
A WATER / Display of the current water pressure or
DRY the temperature of the warm air dryer
T HI / LO Display of current water temperature
or seat temperature
O
LIGHT When night-light function activated,
SENSOR bidet senses automatically toilet light
and night-light LED goes on
SUPER
POWER
SAVING
P POWER Illuminates when unit is turned on
Q Illuminates when night-light is activated
LIGHT
R
AUTO Illuminates when automatic
power-saving mode activated
S SUPER Illuminates when super power-saving
mode activated
V BATTERY Illuminates when batteries need to be
SIGN replaced

5.3 Using the shower toilet

Perform manual cleansing
A sensor is located inside the toilet seat, that is only
activated by skin contact.
1557407-E
1. If plugged-in, the device is turned on and the "POWER" LED P
illuminates on the control panel.
•
If the "POWER" LED does not illuminate, press any button
on the remote control (except HI/LO or FR/BK buttons).
2. Set yourself centered on the toilet seat.
Press the CLEANSING/MOVE button C or BIDET/MOVE
3.
button D.
•
CLEANSING respectively BIDET-function is performed.
4. Press again CLEANSING/MOVE button or BIDET/MOVE button
during the cleansing process.
•
The cleansing nozzle moves back and forth. Nozzle stops
by pressing the button again.
Press STOP button B on the remote control.
5.
•
Shower procedure stops.
Press DRY button E on the remote control.
6.
•
Warm air dryer is activated. Dryer function stops by
pressing the "STOP" button.
7. Press CLEANSING/STOP button L and hold for more than 4
seconds.
•
The device is turned off — All displays expire on the control
panel.
Each function operates for one minute and ends with a
audible beep. Before and after each operation, the self
nozzle cleaning function runs and sanitizes the nozzle head.
Perform automatic cleansing
The automatic cleansing function is a default function for people with
disabilities, children or the elderly, in which a complete cleansing
cycle is automatically executed.
Usage
17