Aquatec® Pure Bidet
7 Maintenance
7.1 Maintenance and servicing
If the cleaning and safety notices are observed, the product will be
maintenance free.
WARNING!
– Check the product regularly for damage and to ensure
that it is securely assembled.
– In the event of damage and/or necessary repairs,
contact the dealer immediately.
– The product must be checked by an authorized
dealer before every re-use or after 24 months at the
latest (see Manufacturer's recommendation for rehab
products of the SPECTARIS industrial association).
7.2 Cleaning and care
WARNING!
Electric shock hazard
– Disconnect the power plug from the wall outlet before
cleaning the unit.
– Make sure that no water splashes to the plug or the
wall outlet.
– Observe the safety information for electrical safety, ®
2.1 Safety information, page 6 .
IMPORTANT!
Hygiene is particularly important in a sensitive area like
the toilet.
– Keep the product clean and wash it regularly.
22
IMPORTANT!
All cleaning agents and disinfectants used must be
effective, compatible with one another and must protect
the materials they are used to clean.
– For further information on decontamination in
Healthcare Environments, please refer to 'The
National Institute for Clinical Excellence' guidelines on
Infection Control www.nice.org.uk/CG002 and your
local infection control policy.
– Do not dry-clean the device.
– Clean the product by hand.
– Do not use abrasive cleaning agents.
Cleaning the shower toilet
1.
Clean the unit with moist, well-wrung soft cloth. For excessive
stains, use soft cloth moistened with mild detergent solution
2.
Wipe out the device with a dry cloth.
Cleaning the water strainer
B
A
1.
Close the water supply by turning the shut off valve clockwise.
2.
Detach the PVC flexible hose A from the inlet adapter B.
3.
Detach the strainer C from the inlet adapter with a pointed
object.
4.
Thoroughly clean the strainer with a soft brush.
C
1557407-E