Setup; Installation / Assembly - Invacare Aquatec Pure Bidet Manuel D'utilisation

Aquatec® Pure Bidet

4 Setup

4.1 Installation / Assembly

Assembling the shower toilet
WARNING!
– Check whether the size and shape of the toilet seat
are suitable for installation.
– Check all the accessory parts are in place.
– Do not connect the power until installation is finalized.
– Ground connection must be done by authorized
service person only.
C
B
1. Unfasten the fixation nuts B of the existing toilet seat A
underneath the toilet bowl.
Remove the toilet seat and keep it with the fixation parts B
2.
and C for later use.
10
A
Close the shut off valve A clockwise.
1.
2. Drain toilet water tank completely by flushing.
A
A
C
B
1557407-E