Detachment - Invacare Aquatec Pure Bidet Manuel D'utilisation

Aquatec® Pure Bidet
WARNING!
Electric shock hazard
– Do not turn over or move the unit after power
connection.
3. If the power indication light is not turned on after the power
plug connection, press any button except HI/LO, FR/BK buttons
of the remote control, then power goes on.
Filling water tank and checking the key functions
B
C
14
A
1. Press the "CLEANSING / STOP" B on the unit or
"CLEANSING" or "BIDET" on the remote control.
•
The water tank is filled. One long beep will sound when
the water tank is filled.
Place one hand on the seat sensor A.
2.
3. With the other hand press "CLEANSING / STOP" on the unit
control panel B or "CLEANSING" or "BIDET" on the remote
control.
•
Water sprays out of the nozzle. Cover the nozzle with your
free hand C to prevent water spattering out.

4.4 Detachment

Follow the below instructions if in need to detach the unit for to
move.
1. Disconnect the power plug.
2. Close the water supply by turning the shut off valve clockwise.
3. Drain the toilet water tank completely by flushing.
4. Disconnect the PVC flexible hose from the T-valve.
1557407-E