Main Components - SOLAC AS3193 Mode D'emploi

engliSH
Never handle the vacuum cleaner or the plug
•
with wet hands.
Do not leave the appliance plugged into the
•
mains unattended.
Keep your vacuum cleaner away from heat
•
sources.
Never use the vacuum cleaner without the dust
•
container or the protective filters correctly fit-
ted.
Always keep the air intakes and outlets clear.
•
Keep hair, clothes, fingers or any other body
•
part away from the air intakes and outlets.
Be very careful when using the vacuum clea-
•
ner on stairs.
Do not use the appliance in confined spaces
•
where explosive or toxic vapours can build up.
Do not use the appliance above the height of
•
the power cord.
Carry out the maintenance operations indica-
•
ted in the CLEANING AND STORAGE section
to prolong the life of the appliance.
Remove all elements from the inside or outsi-
•
de of the appliance used for protection during
transport or for sales promotions, such as pa-
per or plastic bags, plastic sheets, cardboard
and stickers.

mAin componentS

1 Main body.
2 Power cord.
3 On/Off pedal switch.
4 Air outlet filter grille.
5 Groove for attaching the brush during a tem-
porary stop.
6 Electronic suction regulator.
7 Air outlet HEPA filter.
8 Cord-winder pedal button.
9 Carry handle.
10 Dust container.
11 Flexible hose connection.
12 Flexible hose.
13 Mechanical suction regulator.
14 Motor protection filter
15 Container full indicator light.
16 Dust container removal button.
17 Dust container handle.
18 Dust container cover opening button.
19 Dust container cover.
20 Cyclone filter.
21 Maximum fill level of the container.
22 Telescopic metal tube.
23 Height adjustment for the telescopic tube.
AS3193_aspiradora.indd 11
24 Retractable brush button.
25 Universal floor and carpet brush.
26 Hook for temporary stop.
27 Suction head for vacuuming grooves and
corners.
uSe
cYclone tecHnologY
Suctioned dirt enters the dust container (10) and
remains in suspension thanks to cyclone tech-
nology. The dirt particles that escape from the
exterior chamber of the dust container are retai-
ned by the cyclone filter (20) before going throu-
gh the motor protection filter (14), thereby assu-
ring that exhausted air is free from dust particles.
+ This appliance has been designed exclusively
for vacuuming floors, carpets, furniture and
fabrics. Do not use it for any other purpose.
1 Check that the dust container (10) and the fil-
ters (20, 14 and 7) are installed correctly. See
the following section (Cleaning and Mainte-
nance).
2 Insert the flexible hose (12) at the connection
(11) by turning it clockwise. Whenever you
want to remove the hose, turn it counter-cloc-
kwise and pull it outwards.
3 Attach the telescopic metal tube (22).
4 Prepare the appropriate attachments for the
surface you want to clean. Put the desired at-
tachment on the telescopic metal tube (22).
Universal floor and carpet brush (25)
You can use it for all kinds of floors, given that
it is retractable so that it can be adapted to the
surface to be vacuumed. To change the cleaning
position, press the brush button (24) with your
foot. We recommend cleaning hard floors, wood
and parquet with the fibre brush extended, and
cleaning carpets and rugs with the fibre brush
retracted.
Suction head (27)
For cleaning narrow places, grooves and cor-
ners.
You can adjust the length of the telescopic
tube (22). Slide the adjustment device (23)
downwards to release the top part of the tube.
Simultaneously pull upwards or downwards
on the top part until the desired tube length is
reached.
5 Pull out the cord (2) to the yellow mark (ideal
length). If necessary, the cord can be pulled
out to the red mark, but not any further.
en
23/5/16 15:53