Vermeiren Normandie 2F Mode D'emploi page 15

3.3.2 Mounting seat
L
WARNING:
Risk of injury – Make sure that no objects or body parts come
between the seat and the frame.
The seat is attached to the basic frame with clamping fixtures.
B
Place the seat  slightly diagonally with the curved fixture  in such a way that this
A
fixture grabs under the back crossbar of the basic frame .
Press the seat  down at the front so that the clamp  engages on the front
B
crossbar of the basic frame .
Move the backrest a little bit backwards if you have not enough space to mount the seat
cusion on the frame.
If you would like to remove the seat, proceed in the opposite order.
A
Page 13
Normandie 2F
1 = seat
2 = curved fixture
3 = back crossbar
4 = clamp
5 = front crossbar
2017-03