Eschenbach visolux digital XL FHD Mode D'emploi page 37

Connections
HDMI input
You can use the enclosed HDMI cable to connect the device to other devices, using its
HDMI input u.
EN
If the device detects the HDMI signal at the input, it automatically switches to display
this signal. To switch back to the camera picture, press and hold the MENU button d for
3 seconds. To change back to the HDMI signal, press and hold the MENU button d again
for 3 seconds.
If the connection to the HDMI device is interrupted, the device automatically switches to
the camera image.
HDMI output
You can use the HDMI cable supplied to connect the device from its HDMI output k to
the HDMI input on another device, e.g. a television. This enables both the camera image
and the image files to be displayed on the connected device.
USB connection
You can use the USB cable supplied to connect the device from its USB connection f to
the USB connection on another device, e.g. a computer. The SD card inserted in the de-
vice will then be made available as the "ESCHENBACH" drive for data operations.
In addition, the device can be supplied with power and charged via this connection (in-
cluded power supply or USB power supply, for example from a computer).
- 33 -