Homelite HLT26CDB Manuel D'utilisation page 25

For technical review, sent 3 Dec 2013.
Important Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOLS EXPLANATION
Indicates danger, warning or caution. It means attention!!! Your safety is involved.
Your manual contains special messages to bring attention to potential safety concerns as well as
operating and servicing information. Please read all the information carefully to ensure satisfaction
and safe use.
Wear eye, hearing and head protection when operating this equipment.
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15 m
from the operating area.
Do not use blade(s) on the product.
Rotational direction and maximum speed of the shaft for the cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded gasoline intended for motor vehicle use with an octane rating of 91 ([R+M]/2) or higher.
Use synthetic 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU where the product is purchased.
English (Original instructions)
SYMBOLS
10