Scheppach 5909503901 Mode D'emploi D'origine page 13

Troubleshooting
Problem
Pump does not start
Motor overheated
Device is running, but does not
pump
Delivery rate too low
Possible cause
Mains cable not connected
Circuit breaker is triggered
Motor faulty
Water temperature is too high
Pump blocked by foreign objects
Suction/pressure openings blocked
Pump suspended in the air
Pump blocked by foreign objects
Delivery height too high
Hose diameter too small
Hose blocked
Hose kinked
Hose is leaking
Solution
Connect mains cable
Have the pump checked by an electrician
Contact the service centre
Let the water cool down
Check pump for foreign objects
Remove the blockage
Immerse the pump in water
Check pump for foreign objects
Check the delivery height > Technical data
Use hose with larger diameter
Check hose for blockage
Check hose for kinks
Check hose for damage
GB 13