Preparing The Stove; Assembling The Legs; Assembling The Ash-Lip - Dovre 300G Installation Et Mode D'emploi

3.2.

Preparing the stove

Please inspect the stove for damage caused during transport immediately after deliv-
ery and notify your distributor in case there are any defects. Do not put the stove
into operation in the meantime.
In order to avoid damaging the stove during installation and to make handling of the
stove easier, it is recommended to remove previously all loose parts (fire-resistant
bricks, ashtray, ...) from the stove. Note the location of those parts while removing
them, so that you have no difficulties in re-assembling the parts later on.

3.2.1. Assembling the legs

Tilt the stove backwards and mount the legs on the bottom plate of the stove.
3.2.2. Assembling the ash lip
Mount the ash plate to the front side underneath the base plate, using two screws.
29
300G / 310GX 03.27635.000