Fleetsync: Alphanumeric 2-Way Paging Function; Selcall (Selective Calling) - Kenwood TK-5220 Mode D'emploi

FleetSync:
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note: This function is available only in analog operation.

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
• On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
■ Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Enter an ID number (1000 ~ 4999) to make an individual call in
your fl eet.
• Enter a Fleet number and select "ALL" ID to make a call to all
units in the selected fl eet (Fleet call).
• Select "ALL" Fleet and enter an ID number to make a call to the
selected ID in all fl eets (Supervisor call).
ALPHANUMERIC 2-WAY PAGING FUNCTION
/ to select the station you want to call.
17