First Steps; Unlock The Data Logger; Connecting The Data Logger To Pc - TESTO 176 Mode D'emploi

4

First steps

4.1.

Unlock the data logger

1. Open the lock with the key (1).
2. Remove the lock (2) from the locking pin.
3. Pull the locking pin (3) out of the holes in the wall bracket.
4. Slide the data logger out of the wall bracket (4).
4.2.

Connecting the data logger to PC

For testo Comfort Software Basic 5:
The software is available in the Internet as a free download
requiring registration: www.testo.com/download-center.
For testo Comfort Software Professional und testo Comfort
Software CFR:
> Insert the CD into the CD-ROM drive.
1. Install the software testo Comfort Software.
2. Connect the USB cable to a free USB port on the PC.
3. Loosen the screw on the right side of the data logger.
The data logger is delivered with the battery (type TL-5903)
inserted. The display of the data logger shows rSt.
The instructions for the installation and operation of the
software can be found in the testo Comfort Software Basic
5 instruction manual, which can be downloaded together
with the software.
The software can be ordered on CD (article-no: 0572
0580), if the download from the Internet is not desired.
4 First steps
43