Technical Data; General Notes - Matrix HM1028R Guide De L'utilisateur

Read the entire operating
instructions prior to the assembly
and operation of the tool.
These operating instructions are intended
to make it easier for you to get familiar with
your tool and maximize its tool.
The operating instructions contain important
notes on how to work safely, properly and
economically with your machine and how
to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and
working life of the machine.
In addition to the safety regulations
contained herein, you must in any case
comply with the applicable regulations of
your country with respect to the operation
of the machine.
Put the operating instructions in a clear
plastic folder to protect them from dirt and
humidity, and store them near the machine.
The instructions must be read and carefully
observed by each operator prior to starting
the work. Only persons who have been
trained in the use of the machine and have
been informed on its related dangers and
risks are allowed to use the machine. The
required minimum age must be met.
In addition to the safety notes contained in
the present operating instructions and the
special regulations of your country, the
generally recognized technical rules for the
operation of wood working machines must
be observed.
Attention!
Read and understand all instruct-
ions before using this tool.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.

Technical data

Size of saw blade:
No load speed:
Number of teeth:
Mitre stops
Weight
Motor V/Hz
Rated Current:
Subject to technical modifications!
The height of the work piece must be at
least 3 mm.
Make sure that the work piece is always
secured with the clamping device.

General notes

• After unpacking, check all parts for any
transport damage. Inform the supplier
immediately of any faults. Make sure the
delivery is complete.
• Before putting into operation, familiarize
yourself with the machine by carefully
reading these instructions.
• Use only original accessories, wearing or
replacement parts.
• When ordering, include our item number
and the type and year of construction of the
machine.
5
255 mm/10"
6000 RPM
36T
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°
39 lbs
120 V ~ 60 Hz
13 A
GB