Parts List - Matrix HM1028R Guide De L'utilisateur

• The saw should only be used to cut wood,
wood-like materials and plastics.
• Use only the manufacturer's
recommended saw blades that meet the
EN847-1 standard.
• Attach a dust collector to your mitre saw
during operation.
• Select the blades according to the
material to be cut.
• Check the maximum depth of cut.
• When cutting longer pieces always use
extension rails and insert clamps or other
clamping devices for better grip.
• Wear ear protection.
• The operator must stand in front of the
saw during operation.
• Use clamps to secure the workpiece.
• Turn off the power tool if the blade gets
stuck in the workpiece or the workpiece
gets wedged.
• Warning: Do not use blades made of high
speed steel.
• Keep the floor area free of loose particles
such as wood chips and cutoffs.
• Make sure that the blade speed indicated
on its label is at least as high as that of the
saw speed.
• Use gloves when handling saw blades
and rough materials.
• Be sure to use only shims and spindle
rings that are suitable for the purpose
specified by the manufacturer.
• Warning: Do not remove cuttings or other
parts of the work piece from the cutting
area while the machine is running and the
saw has not yet come to a complete stop.
• Always clamp the work piece to the saw
table.
• Make sure that the machine is sitting
securely before beginning to saw.
WARNING! Noise can be harmful to your
health. If a sound level of 85dB (A) is
exceeded, ear protection must be worn.
Before each use, all guards and other
parts should be carefully inspected to see
whether they still fulfill their functions.
Check for alignment, smooth operation,
breakage or other damage that could impair
function. A damaged part should either be
immediately and professionally repaired or
replaced.
Hazard from blocking work pieces or parts!
If blockage occurs, please proceed as
follows:
1. Switch the device off
2. Unplug it
3. Wear gloves
4. Fix blockage with appropriate tools.

Parts list

Parts list refers to figures on pages 2 and 3.
1 Handle
2 Start switch
3 Base
4 Joint for casing / base
5 Rotary table
6 Motor
7 Saw blade
8 Table insert
9 Saw blade guard, fixed
10 Saw blade guard, moveable
11 Chip bag
12 Clamping jaw
13 Locking button
14 Work piece support
15 Latched position lever
16 Locking grip
17 Locking screw
18 Locking screw for drag guide
19 Scale
20 Indicator
21 Guard cover
8