Assembling The Device - Gima NB-810B Notice D'utilisation

27
2. Trial Run:
Power on and check whether the Power LED lights up or not. If not, check
batteries or replace them if necessary.
If the device still does not work, please refer to the section -
Troubleshooting for solutions.
Nota:
• Remember to clean and sterilize the nebulizer and its parts and
components and accessories prior to use for the first time. For details see
the section - Cleaning and Disinfecting.
• If the device does not be used for a long time, carry out the above
described cleaning and disinfecting.
• To avoid cross infection, all users of a same device should each be
provided with a set of nebulizer and accessories. The nebulizers
and accessories for different users should be stored separately.

ASSEMBLING THE DEVICE

1. Install Nebulizer
Hold the main unit and the nebulizer of the device with your left hand
and right hand respectively; gently push the nebulizer along the direction
of arrow (see Fig. 3) into the slot; a "Ka" sound indicates it is installed into
position.
Fig. 3
Note:
1) Always keep electrode and nebulizer clean.
2) If it is not installed correctly, it may dose not work during nebulizing.
3) As consumable, the nebulizer has a service life of 6 months (given that
it is used 3 times pay day). You can get additional nebulizers from your
supplier or the nearest local distributors.
ENGLISH