Heat Setting; Using The Hob - AEG IKK86683FB Notice D'utilisation

• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:

Heat setting

1 - 2
3 - 4
5
6 - 9
5.3 Heat setting
Press the desired heat setting on the
control bar. You can also move your
finger along the control bar to set or
change the heat setting for a cooking
zone.
To deactivate a cooking zone, press 0.

5.4 Using the hob

The induction cooking surface consists of
12 single triangular zones in total. The
triangular zones may be activated
separately or can be combined in pairs to
create 6 standard cooking zones. The
pairs of triangular zones can be further
combined together in various ways.
Each pair of triangles is controlled by the
appropriate control bar. Each square on
the control panel represents one
standard cooking zone on the induction
cooking surface.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hours
One pair of triangles works
as a standard cooking zone.
Cookware
You may use various sizes of cookware:
small, medium, large. To learn how the
hob determines the cooking mode based
on the cookware refer to "Induction
cooking surface" below. For more
information on cookware, refer to "Hints
and tips".
5.5 Induction cooking surface
The hob automatically determines the
mode applicable to the size and the
shape of the cookware.
Place the cookware centrally on the
selected area. The cookware should
cover the selected area as much as
possible.
• Smaller cookware with the bottom
diameter between 100 mm and 160
mm should be placed centrally on a
single triangle.
• Medium-sized cookware with the
bottom diameter between 160 mm
and 210 mm should be placed on a
pair of triangles.
ENGLISH 11