Powerboost - AEG IKK86683FB Notice D'utilisation

Masquer les pouces Voir aussi pour IKK86683FB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14
www.aeg.com
5.8 Bridge
If you place cookware on two or more
standard cooking zones and the heat
setting level is set to 0,
If the default configuration is not
appropriate for your cookware, press
repeatedly to choose the desired
configuration manually.
The following modes are available:
• Centre
• Vertical
• Horizontal
• Standard cooking zone
The cooking zone indicators change
automatically to show the possible
combination.
All single triangles of one mode are
controlled by one control bar which lights
up.
When you change the heat setting,
disappears. When the heat setting is set
to 0,
comes on again.

5.9 PowerBoost

This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
It is not possible to use the function when
Bridge is activated in the Centre, Vertical
or Horizontal mode.
To activate the function for the
cooking zone: touch
turns red.
The function deactivates automatically.
5.10 Timer
You can use this function to set the
length of a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To activate the function or change the
time: touch
the indicators
appears.
display.
Touch
minutes). After 3 seconds, the timer
starts to count down automatically. The
indicators
stays red.
When the timer finishes counting down, a
signal sounds and 00 flashes. To stop
the signal, touch
To deactivate the function: touch
The indicators
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
You can use this function to monitor how
long a cooking zone operates.
For maximum duration
values, refer to "Technical
data".
Count Down Timer
. The timer digits 00 and
and
turns red, and
If the timer is not set, all
indicators disappear after 3
seconds.
or
to set the time (00 - 99
,
, and
.
and
or
to set 00 on the display.
CountUp Timer
. The symbol
light up on the
turns white.
disappear.
.
light up. Use

Publicité

Table des Matières
loading

Table des Matières