Daily Use; Automatic Switch-Off; Activating And Deactivating - AEG IKK86683FB Notice D'utilisation

Masquer les pouces Voir aussi pour IKK86683FB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
www.aeg.com
Sensor field
9
10
11
12
13
-
14
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
indicator is on, there is a risk
of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
The indicators
cooking zone is hot. They show the level

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Press and hold
deactivate the hob.
Control bars come on after you activate
the hob and go off after you deactivate
the hob. When the hob is deactivated
you can see only
When you activate the hob and place the
cookware in the correct position, the hob
recognizes it and the appropriate control
panel lights up. The red cooking zone
indicator appears above the control bar
and indicates the position of the pot.
Comment
To increase and decrease the time.
/
To activate and deactivate Hob²Hood.
To activate and deactivate Pause.
To activate PowerBoost.
To set a heat setting: 0 - 9.
To activate and deactivate PowerSlide.
/
As long as the
/
/
appear when a
to activate or
.
of the residual heat for the cooking zones
you are currently using.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the
cookware,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.

Publicité

Table des Matières
loading

Table des Matières