Levelling The Appliance - Vestfrost AKG/S 337 Mode D'emploi

Levelling the appliance

Depending on the equipment of the appli-
ance, the device is either installer with 4
wheels that can be levelled, or with two feet
installed in front of the cabinet.
Wheels
Only available with DIN 58345 kit
Install unit and rotate nut clockwise to move
foot to floor. See fig 8-10
Feet
1. Level the appliance sideways by screw-
ing the adjustable feet up or down using
the accompanying spanner. se fig 10
2. Check that the appliance is absolutely
level.
fig. 8
If the appliance is to be placed on a soft
surface, e.g. floorboards or a carpet, it is
best to recheck whether the appliance is
still level after a period of time as the under-
lying surface may give under the weight of
the appliance.
fig. 9
11
GB
fig. 10