Reversing the door
Remember to unplug the unit.
Note:
the unit may not be placed on its back.
OBS:
Left-side top hinge is required for reversing
the door. Request a spare parts list
1. Remove the lock pin using a flat-headed
screwdriver.
2. Remove the top panel. Remove the 4
screws at the top op the panel.
3. Remove the 2 screws below the panel.
4. Tilt the top panel forwards to remove it
Place the panel upside down on top of
the unit).
5. Remove upper hinge (use hex key to the
2 screws) and the torsion spring.
21
GB