GB
Installation and start-up
Battery backup
This appliance is equipped with a battery
back up system. Please activate the battery
backup before final placement A fuse is
placed in the bag with helping materials.
Take this fuse and insert is as illustrated on
the picture.
NOTE! The battery backup system does
not supply the cooling system
with power. When starting up the
appliance for the first time it is
necessary to switch on the battery
backup system.
NOTE! The battery for back up should be
changed every third year to secure
48 hours of back up. Please put
this change in the maintenance
schedule for every third year.
Fuse
fig. 3
Only available with DIN 58345 kit
Battery backup function
The battery backup system supplies the
controller and keyboard with power at
power failure. This makes it possible to
supervise the temperatures in the unit dur-
ing the power failure. The battery backup
system makes it possible to supervise the
temperatures for 48 hours.
After a power failure and at the first start
up the battery needs to be recharged. To
regain the full capacity the battery will be
reloading for 10 days.
8