Getting Started; Rack Mounting A Single Antenna Splitter; Rack Mounting Two Antenna Splitters Side By Side - Harman AKG APS4 Mode D'emploi

3 Getting Started

Rack Mounting a Single
Antenna Splitter
Rack Mounting Two Antenna Splitters
Side by Side
APS4
1) Unscrew the four rubber feet (Please note Fig. 6 on page 63) from the antenna splitter
bottom panel.
2) Unscrew the two fixing screws (2) from each side panel.
3) Use the fixing screws (2) to screw the short bracket (3) to one side panel and the long
bracket (4) to the other side panel. The brackets are contained in the supplied rack
mounting kit.
4) Install the antenna splitter in your rack.
1) Unscrew the four rubber feet (Please note Fig. 7 on page 64) from each antenna splitter's
bottom panel and remove the screws (5) from the rubber feet (1).
2) Unscrew the two fixing screws (2) from the right-hand side panel of one antenna splitter
and from the left-hand side panel of the other antenna splitter.
3) Insert one connecting strip (4) into each free slot in the side panel of the first antenna
splitter, making sure to align the hole in each connecting strip (4) with the appropriate
threaded hole in the antenna splitter bottom panel.
4) Fix the two connecting strips (4) on the first antenna splitter using two of the screws (5)
you removed from the rubber feet.
5) To join the two antenna splitters, slide the connecting strips (4) on the first antenna
splitter through the free slots in the side panel of the second antenna splitter. Make sure
to align the hole in each connecting strip (4) with the appropriate threaded hole in the
bottom panel of the second antenna splitter.
6) Fix the two connecting strips (4) on the second antenna splitter using two of the screws
(5) you removed from the rubber feet (1).
7) Screw a short bracket (6) to the outer side panel of each antenna splitter using for each
bracket two of the screws (2) you removed from the antenna splitter side panels.
8) Install the antenna splitters in your rack.
Be sure to keep the remaining screws (5) for later use.
NOTE
Getting Started
23