Setting The Zeroing Distance; Set Ballistic Curve Display And; Zeroing Distance Display - Leica GEOVID HD-B 3000 Notice D'utilisation

SETTING THE ZEROING DISTANCE

Start with step 1 if you have not previously opened
the menu control, or with step 3 if you have just set
the unit of measure and
display.
1. Press and hold the secondary/menu button
(≥ 3 s).
• appears.
EU.US
2. Press the secondary/menu button 2 times
(< 2 s)
• The display switches from
3. Pressing the main/trigger button
selects the required zeroing distance.
– [m],
100
– [m] or
200
– [m] or
GEE
– [y] or
100
– [y] or
200
– [y].
300
4. Save your setting by briefly pressing the sec-
ondary/menu button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display switches
to and then disappears.
AbC
is still flashing in the
SId
2
to .
bALL SId
1 repeatedly
SET BALLISTICS CURVE DISPLAY AND

ZEROING DISTANCE DISPLAY

You can display the 3 values at any time if you want
to verify your settings, e.g. because of a change in
the hunting conditions or if some time has passed
between uses.
Press the secondary/menu button
• The following will appear in sequence for around
2 s each underneath the reticule (instead of the
range, where applicable)
– the set ballistics curve
– the set zeroing distance
– the set ballistic output value
EN
briefly twice.
2
51