Distance Measurement - Leica GEOVID HD-B 3000 Notice D'utilisation

DISTANCE MEASUREMENT

Aim directly at an object to measure its distance.
Proceed as follows:
1. Press the main/trigger button
activates.
• The reticule appears.
The reticule remains lit for another 6 seconds after
you release the main/trigger button. The reticule
remains lit continuously while the button is pressed
and held.
2. Aim at the object while the reticule is lit.
3. Press the main/trigger button again.
You can start another measurement by pressing
9 8
the main/trigger button at any time, as long as the
reticule display is lit.
- - -
– the distance to the object is less than 10 me-
. The rangefi nder
1
– the range is exceeded or
– the object is not suffi ciently refl ective.
When the display disappears, the rangefi nder shuts
down automatically.
a. The reticule disappears briefl y during the
measurement.
b. The measured value is displayed.
appears if
ters/yards or
EN
45