Care/Cleaning; Replacement Parts - Leica GEOVID HD-B 3000 Notice D'utilisation

EN

CARE/CLEANING

Your Leica Geovid HD-B/HD-R requires no special
care. Coarse dirt particles like sand can be re-
moved with a soft brush or simply blown off. Fin-
gerprints, etc. on lenses and eyepieces can be
removed with a damp cloth, and the surfaces must
then be wiped with a clean leather or lint-free cloth.
Important
Do not apply pressure when wiping heavily soiled
lens surfaces. The coating is abrasion-resistant, but
is not impervious to sand or salt crystals.
The housing should be cleaned using a damp cloth
only. Using a dry cloth may cause static electricity
due to friction. Do not use alcohol or chemical
cleaning solutions on the lenses or housing.
In addition to its type designation, each Leica
Geovid HD-B/HD-R has a unique serial number.
Please take note of this number as a safety mea-
sure.
Attention
Do not open the device!
58

REPLACEMENT PARTS

Please contact our customer service or your re-
gional Leica representative (see Leica Camera AG
homepage for addresses) if you ever need any
replacement parts (e.g. an eyecup or an eyepiece
cap) for your Leica Geovid HD-B/HD-R.