Ballistic Parameters - Leica GEOVID HD-B 3000 Notice D'utilisation

DISPLAYING AND CHECKING THE SET

BALLISTIC PARAMETERS

(only HD-B 3000)
If you want to check your settings, you can display
the values at any time. To do so, press the sec-
ondary/menu button twice.
2
• The following will appear in sequence for around
2 s each underneath the reticule (instead of the
range, where applicable)
– the set ballistic curve (see p. 50)
– the set zeroing distance
(see p. 51)
– the set ballistic output value
(see p. 54)
Only the setting or
US EU
when all ballistics functions (
tivated.
will be displayed
= OFF) are deac-
bALL
EN
55