Toto TLK07001G Manuel D'installation Et Guide D'utilisation page 25

PERIODIC MAINTENANCE - Nozzle
[ For the TLK0800*G model ]
Clean the nozzle periodically as the soap cannot flow if the nozzle is clogged.
1. Unplug from the power outlet.
2. Use a Phillips head screwdriver to loosen
and remove the screw.
(Turn the screwdriver about 10 turns.)
Caution
If you clean the nozzle in a sink, make sure to
cover the drain to prevent losing the small parts.
3. When the screw is completely loose, pull the
nozzle out to remove it.
4. Pinch the filter and pull it out from the nozzle.
5. Leave the nozzle and the filter to soak in hot
water for a few minutes.
Note
This makes it easier to remove any soap that
has adhered to the nozzle.
(Continued)
Nozzle
Make sure to fully insert the screwdriver tip
before loosening the screw. If the Phillips head
screwdriver is not properly inserted, the screw
head may be deformed.
25
Screw
Loosen
Phillips head
screwdriver
Gently pull upwards at
a slant
Remove
Filter